Code: 00010004
Description: CR motor encoder check error
The CR motor makes small revolutions clockwise and counterclockwise. When it turns, the printer checks the encoder output signals to make sure the motor is turning at the correct speed/ distance. If the encoder doesn’t send the correct signal or output data, an error occurs.
The CR motor makes small revolutions clockwise and counterclockwise. When it turns, the printer checks the encoder output signals to make sure the motor is turning at the correct speed/ distance. If the encoder doesn’t send the correct signal or output data, an error occurs.
Remedy: Make sure there is nothing blocking the carriage. If that does not solve the problem, check the CR motor encoder connection. If there still is a problem, try the following. • Check the plastic step ruler for soiled areas, obstructions, and damage • Make sure no foreign material or ink tubes (from pump assembly) are blocking the carriage path (see “Removing the Maintenance Assembly” on page 143 for reassembly points) • Replace the encoder sensor • Replace the CR motor • Replace the Main Board