Code: 0001001D
Description: CR servo parameter error
The printer causes this error and stops operation when it detects that a voltage beyond the prescribed range is output to the CR Motor.
The printer causes this error and stops operation when it detects that a voltage beyond the prescribed range is output to the CR Motor.
Causes:
Remedy: 1. Clean dirt or paper dust on the Timing Fence and check if it is damaged. 2. Execute the CR Timing Belt Tension Adjustment . 3. Replace the CR Encoder Sensor . 4. Replace the CR MOTOR ASSY. . 5. Replace the BOARD ASSY., MAIN .