Code: 0001001E
Description: PF servo parameter error
The printer causes this error and stops operation when it detects that a voltage beyond the prescribed range is output to the PF Motor.
The printer causes this error and stops operation when it detects that a voltage beyond the prescribed range is output to the PF Motor.
Causes:
Remedy: 1. Clean dirt or paper dust on the Loop Scale and check if it is damaged. 2. Execute the PF Timing Belt Tension Adjustment . 3. Replace the PF Encoder Sensor . 4. Replace the PF MOTOR ASSY. . 5. Replace the BOARD ASSY., MAIN .