Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 00010007 — Epson Stylus Pro 9880

Code: 00010007

Description: The CR Motor out of position time-out error
The printer causes this error and stops operation if it detects that the Carriage could not be moved to the target position within a fixed time period while the CR Motor stopping operation is performed.
Causes: The Carriage movement cannot be finished due to the remaining pulses smaller than those generated by the motor out-of-step state.
Remedy: 1. Reattach the Timing Fence for detecting the encoder securely and correctly. 2. Clean dirt or paper dust on the Timing Fence and check if it is damaged. 3. Execute the CR Timing Belt Tension Adjustment . 4. Replace the CR Encoder Sensor . 5. Replace the CR MOTOR ASSY. . 6. Replace the BOARD ASSY., MAIN .

← Xem tất cả mã lỗi Epson Stylus Pro 9880

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie