Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 930A — Brother MFC-L5700DW

Code: 930A

Description: Paper ran out during Fax / List continuous printing. ƒÞ Error code 9400 Firmware version of the main PCB is older than that of the TT and LT. <User Check> ¡E Set paper in the appropriate paper tray. ¡E Install the latest main firmware.
Remedy: 1 A paper empty actuator caught in some sections of the machine *1 Reattach the appropriate paper empty actuator. *1 2 A paper feed actuator caught in some sections of the machine *2 Reattach the appropriate paper feed actuator. *2 3 Connection failure of a paper feed sensor harness *2 Reconnect the appropriate paper feed sensor harness. *2 4 Connection failure of the HVPS flat cable *2 Reconnect the HVPS flat cable. *2 5 Connection failure of the LT control PCB harness *2 Reconnect the LT control PCB harness. *2 6 A paper empty sensor PCB failure *1 Replace the appropriate paper empty sensor PCB ASSY. *1 7 A paper feed sensor PCB failure *2 Replace the appropriate paper feed sensor PCB ASSY. *2 8 LT control PCB failure Replace the LT control PCB. 9 High-voltage power supply PCB failure *2 Replace the high-voltage power supply PCB. *2 10 A TT relay PCB failure *1 Replace the TT relay PCB. *1 11 TT control PCB failure *1 Replace the TT control PCB. *1 12 Low-voltage power supply PCB failure *2 Replace the Low-voltage power supply PCB ASSY. *2 13 Main PCB failure Replace the main PCB ASSY. Note: Only for when each tray above is set for A4 / Letter / Legal / Folio. *1 Models with 520-sheet only *2 Models with 250-sheet only

← Xem tất cả mã lỗi Brother MFC-L5700DW

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie