Code: 50.9
Display: 50.X Fuser Error Turn off then on
Description: A fuser error has occurred.
High fuser temperature (subthermistor)
High fuser temperature (subthermistor)
Remedy: 1. Verify the fuser is installed correctly and fully seated. 2. Check that connector J6007 on the fuser is seated correctly. Replace the connector as necessary. 3. Turn off the printer. 4. Remove the fuser. 5. Measure the resistance between fuser connectors J6007LA-2 and J6007LA-3. If the resistance is not 100 kohms to 3 Mohms, replace the fuser. 6. Replace the DC controller PCA.