Code: 930A
Description: Paper ran out during Fax / List continuous printing. ƒÞ Error code 9400 Firmware version of the main PCB is older than that of the TT and LT. <User Check> ¡E Set paper in the appropriate paper tray. ¡E Install the latest main firmware.
Remedy: 1 A paper empty actuator caught in some sections of the machine *1 Reattach the appropriate paper empty actuator. *1 2 A paper feed actuator caught in some sections of the machine *2 Reattach the appropriate paper feed actuator. *2 3 Connection failure of a paper feed sensor harness *2 Reconnect the appropriate paper feed sensor harness. *2 4 Connection failure of the HVPS flat cable *2 Reconnect the HVPS flat cable. *2 5 Connection failure of the LT control PCB harness *2 Reconnect the LT control PCB harness. *2 6 A paper empty sensor PCB failure *1 Replace the appropriate paper empty sensor PCB ASSY. *1 7 A paper feed sensor PCB failure *2 Replace the appropriate paper feed sensor PCB ASSY. *2 8 LT control PCB failure Replace the LT control PCB. 9 High-voltage power supply PCB failure *2 Replace the high-voltage power supply PCB. *2 10 A TT relay PCB failure *1 Replace the TT relay PCB. *1 11 TT control PCB failure *1 Replace the TT control PCB. *1 12 Low-voltage power supply PCB failure *2 Replace the Low-voltage power supply PCB ASSY. *2 13 Main PCB failure Replace the main PCB ASSY. Note: Only for when each tray above is set for A4 / Letter / Legal / Folio. *1 Models with 520-sheet only *2 Models with 250-sheet only