Code: 50.9
Display: 50.X FUSER ERROR
Description: A fuser error has occurred.
high fuser temperature (subthermistor)
high fuser temperature (subthermistor)
Remedy: Fuser Failure (Abnormally High Temperature Sub Thermistor) 1. The connector between the fuser and the printer is not connected properly. Reseat the fuser. Check the connector J5013 between the fuser and the printer. Replace it if damaged. 2. Short in the sub thermistor. Turn the printer off and remove the fuser. Measure the resistance between the fuser connectors J5013LA-4 (SUBTH) and J5013LA-3 (+3.3V). If it reads 600 ohms or below (at ambient temperature), replace the fuser. 3. Faulty DC controller PCB, replace the DC controller PCB.