Code: 55.X
Display: 55.X PRINTER ERROR
Description: The DC controller is not communicating with the formatter. The problem could be caused by a timing error or an intermittent connection. (Event log only) 55.01.00 - DC controller memory error. 55.5 - HP 3700 only - A job was sent while Resend Upgrade is on the display.
Remedy: 1. Press OK to continue. 2. If the message persists, turn the printer off and then back on. 3. Reseat or replace the connectors between the DC controller and the formatter. 4. If the problem persists, replace the DC controller PCB. 5. Replace the formatter. For the following specific error, perform indicated action. 55.01.00 - Replace the DC controller PCB. 55.5 - Do not replace the DC controller PCB or formatter PCB. Resend the firmware upgrade before sending any more print jobs.