Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 41.X — HP Color LaserJet 3550

Code: 41.X

Display: 41.X PRINTER ERROR
Description: A printer error has occurred.
X Description: 2 - Beam detect misprint error. 3 - Media feed error (size) 5 - Media feed error (type) 7 - Feed delay error
Remedy: 1. Press to continue or press for more information. 2. If the message persists after exiting help, turn the printer off and then back on. 3. Perform the following actions for the indicated errors: 41.2 error - laser/scanner error, perform the following steps: 1. Connectors in laser/scanner control line are not connected properly. Reseat the DC controller PCB connectors: J1022, J1026, J1027 and the laser/scanner unit connectors: J101A, J101B, J5001A, J5001B, J5020). 2. Bad laser/scanner unit: replace the laser/ scanner. 3. Bad DC controller PCB; replace the DC controller PCB. 41.3 error - occurs when the correct media size is loaded in the designated paper tray, but the printer mis-reads it as the incorrect size, perform the following steps: 1. Registration shutter does not move smoothly and should be reseated; or, shutter is damaged and should be replaced. 2. The DC controller PCB is defective. Replace the DC controller PCB. 41.5 error - occurs when the correct media type is loaded in the designated tray but the printer mis-reads it as the incorrect type, perform the following steps: 1. Defective media sensor, replace the sensor. 2. Defective DC controller PCB, replace the PCB. 41.7 error - occurs when a page is jammed in the paper path. See Paper path troubleshooting, later in this chapter.

← Xem tất cả mã lỗi HP Color LaserJet 3550

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie