Code: 50.1
Display: 50.X FUSER ERROR
Description: A fuser error has occurred.
low fuser temperature
low fuser temperature
Remedy: Fuser failure (Abnormally Low Temperature Main Thermistor), perform the following steps: 1. The connector between the fuser and the printer is not connected properly. Reseat the fuser. Check the connector J5013 between the fuser and the printer. Replace it if damaged. 2. Break in the main thermistor. Turn the printer off and remove the fuser. Measure the resistance between the fuser connectors J5013LA-2 (MAINTH) and J5013LA-1 (GND). If it is not within the rage of 330k ohms to 50k ohms (at ambient temperature), replace the fuser. 3. Faulty DC controller PCB. Replace the DC controller PCB.