Code: 68.X
Display: 68.X STORAGE ERROR SETTING CHANGE
Description: One or more printer settings that were saved in the nonvolatile storage device are invalid and have been reset to its factory default. Pressing GO should clear the message. Printing can continue, but unexpected behavior might occur.
X Description: 0 on board NVRAM 1 removable disk (flash or hard)
X Description: 0 on board NVRAM 1 removable disk (flash or hard)
Remedy: 1 Press GO to continue. 2 Turn the printer off and then back on. 3 Check the printer settings to determine which settings have been changed.