Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 30.1 — HP Color LaserJet 4730mfp

Code: 30.1

Display: 30.1.YY SCANNER FAILURE
Description: An error has occurred in the scanner. Use the following list to identify specific errors: • 30.1.1 = The scanner cover is open. • 30.1.2 = A jam has occurred in the ADF. • 30.1.3 = The ADF could not pick up the paper. • 30.1.6 = An error has occurred at the scanner fan. (See the separate entry for this error.) • 30.1.7 = A communication error has occurred in the scanner. • 30.1.8 = A scanner calibration error has occurred. (See the separate entry for this error.) • 30.1.10 = An error has occurred at the ADF fan. (See the separate entry for this error.) • 30.1.15 = Scanner initialization failed. • 30.1.17 = The scanner carriage is locked. • 30.1.18 = An error occurred on the scanner PCB. • 30.1.19 = An error occurred at the scanner lamp. • 30.1.22 = A fatal hardware error has occurred in the scanner. • 30.1.23 = A scanner calibration error has occurred. • 30.1.24 = The ADF jam access door is open. • 30.1.25 = A general error has occurred in the scanner or ADF. This error is most likely a memory corruption. • 30.1.29 = The ADF output bin is full. • 30.1.36 = The scanning firmware upgrade failed. The MFP automatically tries to upgrade the firmware again the next time the MFP is turned on.
Remedy: 1. Turn the MFP off and then on to try to clear the message. 2. If the message indicates that a jam has occurred, clear the jam. 3. Verify that the cable between the print engine and the scanner is securely connected. 4. Upgrade the firmware. 5. If you are unable to resolve the problem, replace the scanner assembly.

← Xem tất cả mã lỗi HP Color LaserJet 4730mfp

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie