Code: 30.1.8
Display: 30.1.8 SCANNER FAILURE
Description: This is a scanner calibration error. The scanner might be locked, or a cable might not be connected correctly. During the MFP initialization sequence, the scanner optical assembly moves from its home position to the calibration strip. If this movement does not occur, this error appears.
Remedy: 1. Raise the ADF and ensure that the scanner lock is in the unlocked position. 2. Turn on the MFP and watch to see if the optical assembly moves. If it does not move, remove the scanner glass to see if anything is hindering the optical assembly from moving. 3. Ensure that the optical assembly drive belt is installed correctly. 4. Verify that the connector CN106 on the scanner controller PCB is firmly seated.