Code: 50.X
Display: 50.X FUSER ERROR
Description: A fuser error has occurred. The error might be due to an inadequate power supply, inadequate line voltage, or a problem with the fuser. The following are specific fuser errors: 50.1: A low fuser temperature error has occurred in the main thermistor. 50.2: A fuser warm-up service error has occurred. 50.3: A high fuser temperature error has occurred in the main thermistor. 50.6: An open fuser error has occurred. 50.7: A fuser pressure release mechanism has failed.
Remedy: 1. Turn the MFP off then on. 2. Reinstall the fuser and check the fuser connection (J5001) with the DC controller. If the connector is damaged, replace it. 3. Replace the fuser. 4. Replace the low-voltage PCB. 5. Replace the DC controller.