Code: 50.1
Display: 50.1 FUSER ERROR CYCLE POWER
Description: Indicates that a low temperature error has occurred in the fuser.
Remedy: 1 Verify the fuser is completely seated inside the printer. 2 Turn the printer off and on to reset the printer. 3 Turn the printer off and remove the fuser. Measure the resistance across fuser connectors J26F-A4 (FXTHU) and J26F-A3 (GND). If it is not in the range of 250 kOhms to 600 kOhms (room temperature), check the wiring from the connector J222 on the controller board up to the upper thermistor. If the wiring is normal, replace the fuser kit. 4 Reconnect connector J222 on the controller board and connector J26 on the fuser. 5 Replace the fuser kit. 6 Replace the power supply.