Code: 10.XX.YY
Display: 10.XX.YY SUPPLIES ERROR
Description: The printer cannot read or write to at least one print cartridge or image drum memory tag, or at least one memory tag is missing.
XX description: 00 = e-label memory data error 10 = e-label memory is missing 20 = refilled, non-HP supply (only appears in the event log) 30 = cloned cartridge/supply (only appears in the event log) 90 = toner replenishment malfunction reported by the image drum
YY description: 00 = black print cartridge 01 = cyan print cartridge 02 = magenta print cartridge 03 = yellow print cartridge 05 = black image drum 06 = cyan image drum 07 = magenta image drum 08 = yellow image drum
When a 10.20.YY or 10.30.YY error occurs, a question mark is placed on the gas gauge of the supply or supplies with the error. These errors are noted in the event log and NON HP SUPPLY IN USE appears on the control panel. If multiple supplies have this error, a 10.XX.YY error is displayed for the first supply detected with the error. When the error corresponding to the first supply is resolved, another 10.XX.YY error is displayed for the next supply. This continues for all of the supplies errors. Note The consumables gas gauge and supplies status menu are always updated to indicate all supplies with a supplies memory error, even though the message refers to a single supply. Note 00 = memory data error might be caused when using non-HP supplies.
XX description: 00 = e-label memory data error 10 = e-label memory is missing 20 = refilled, non-HP supply (only appears in the event log) 30 = cloned cartridge/supply (only appears in the event log) 90 = toner replenishment malfunction reported by the image drum
YY description: 00 = black print cartridge 01 = cyan print cartridge 02 = magenta print cartridge 03 = yellow print cartridge 05 = black image drum 06 = cyan image drum 07 = magenta image drum 08 = yellow image drum
When a 10.20.YY or 10.30.YY error occurs, a question mark is placed on the gas gauge of the supply or supplies with the error. These errors are noted in the event log and NON HP SUPPLY IN USE appears on the control panel. If multiple supplies have this error, a 10.XX.YY error is displayed for the first supply detected with the error. When the error corresponding to the first supply is resolved, another 10.XX.YY error is displayed for the next supply. This continues for all of the supplies errors. Note The consumables gas gauge and supplies status menu are always updated to indicate all supplies with a supplies memory error, even though the message refers to a single supply. Note 00 = memory data error might be caused when using non-HP supplies.
Remedy: 1 In the instance of 10.00, 10.20 and 10.30 errors, check if refilled cartridges or drums are used. Replace them with HP consumables. Note If a drum or cartridge reached a “low” or “out” condition and was moved to a different printer, it might be reported as a NON HP SUPPLY. 2 Turn the printer off, and then turn the printer on again to possibly clear the error. 3 Replace the indicated supply. 4 Check the print cartridge or image drum e-label indicator for damage. Replace the print cartridge or the image drum if necessary. 5 For print cartridges, check: • connectors J16, J17, J18, and J19 on the antenna PCAs. • connectors J1001, J1006, J1007, J1008, and J1009 on the memory controller PCA. • connector J802 on the T driver PCA. 6 For image drums, check: • connectors J12, J13, J14, and J15 on the antenna PCAs. • connectors J1001, J1002, J1003, J1004, and J1005 on the memory controller PCA. • connector J802 on the T driver PCA. 7 Replace the antenna PCA for the indicated cartridge or drum. 8 Replace the T driver PCA. 9 Replace the DC controller PCA
In the instance of a 10.90.YY error, the image drum is reporting toner concentration-to-carrier is very low. This error might occur when non-HP supplies are used. Make sure that the toner delivery system and shutters are functioning correctly.
In the instance of a 10.90.YY error, the image drum is reporting toner concentration-to-carrier is very low. This error might occur when non-HP supplies are used. Make sure that the toner delivery system and shutters are functioning correctly.