Description: A staple jam exists in the stapling unit.
Remedy: 1 Clear the jam. 2 Turn the printer off, and then turn the printer on again. 3 Test the staple sliding motor (M8). 4 Make sure that the stapler unit slides to the home position at power on. 5 Make sure that the staple cartridge is installed correctly. 6 Make sure that no damaged staples exist in the staple cartridge or in the stapler unit. 7 Test another staple cartridge. 8 Check all of the cable connections at the module and at the controller PCA. 9 Replace the stapler unit. 10 Replace the controller PCA.