Code: 13.1C.00
Display: 13.1C.00 FUSER JAM LOWER LEFT DOOR
Description: A fuser wrap jam occurred. The printer detected that media is wrapped around the fuser roller
Remedy: 1 Make sure that the media being used is within specifications, and that the correct media type settings for the media being used are set on the control panel. 2 Remove the media from the fuser through the lower left door. Removing the fuser assembly might be helpful. 3 Check the fuser output sensor (PS150) and its flag for correct functionality, and check the supporting connectors to the DC controller PCA. 4 Check the fuser rollers for damage or contamination. Verify fuser integrity by printing a demo or configuration page. 5 Replace the fuser assembly if necessary.