Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 50.1X.YZ — HP Color LaserJet CM4540 MFP

Code: 50.1X.YZ

Display: 50.1X.YZ Fuser Error
Description: The product experienced a fuser error. • X = fuser mode • Y = previous printer sleep state • Z = next printer sleep state
Low fuser temperature and fuser warm-up failure
Remedy: 1. Remove the fuser, and then reinstall the fuser. Make sure that there is no residual paper in the fuser. Make sure that the product is not located in front of a vent or window where cool air may interfere with the ability of the fuser to heat up. 2. Check the product power source. Make sure that the power source meets product requirements. Make sure that this is the only device using the circuit. 3. Replace the fuser. 4. Check the connector (J50) between the fuser and the printer. If it is damaged, replace the fuser drive assembly or fuser. 5. If the error persists, replace the low-voltage power supply. 6. If this product has been previously serviced, check the connectors (J160 and J162) on the DC controller PCA and the connector (J25) on the power line between the low-voltage power supply assembly and the fuser.

← Xem tất cả mã lỗi HP Color LaserJet CM4540 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie