Code: 50.7X.YZ
Display: 50.7X.YZ Fuser Error
Description: The product experienced a fuser error. • X = fuser mode • Y = previous printer sleep state • Z = next printer sleep state
Fuser pressure-release mechanism failure
Fuser pressure-release mechanism failure
Remedy: 1. Remove the fuser, and then reinstall the fuser. Make sure that there is no residual paper in the fuser. 2. Check the fuser pressure-release sensor flag. If it is damaged, replace the fuser. 3. Use the sensor test in the manual sensor test to verify that the fuser pressure-release sensor (SR7) is properly functioning. If it is not, replace the sensor. 4. Use the fuser pressure-release drive test in the component test to verify that the fuser motor (M2) is properly functioning. If it is not, replace the fuser motor. 5. If this product has been previously serviced, check the connector (J128) on the DC controller PCA.