Code: 10.XX.YY
Display: 10.XX.YY Supplies Error
Description: A 10.XX.YY Supplies Error indicates either an error with one of the print cartridges or a notification of Override at out or Color Supply Out settings. The values of XX are: • 00 = memory error on supply • 10 = memory tag missing • 30 = non-HP supply in use • 32 = unauthorized supply in use • 70 = cartridge-out override activated (Override In Use) • 71 = monochrome printing after color cartridge out activated (Printing Black Only) • 80 = cartridge-out override deactivated because user limit reached (Override Not In Use) • 81 = monochrome printing after color cartridge out deactivated (Not Printing Black Only) • 88 = cartridge-out override deactivated because maximum use/wear limit reached (Override Not In Use) • 89 = cartridge-out override deactivated because cartridge out of toner (Override Not In Use) • 90 = replace cartridge (Replace <color> Cartridge) • 92 = cartridge not engaged
For errors 70 through 92, the main description appears only in the event log and is not posted on the control panel. The control-panel message is indicated in parentheses. The values of YY are: • 00 = black print cartridge • 01 = cyan print cartridge • 02 = magenta print cartridge • 03 = yellow print cartridgep
For errors 70 through 92, the main description appears only in the event log and is not posted on the control panel. The control-panel message is indicated in parentheses. The values of YY are: • 00 = black print cartridge • 01 = cyan print cartridge • 02 = magenta print cartridge • 03 = yellow print cartridgep
Remedy: 10.00.YY / 10.10.YY / 10.30.YY / 10.32.YY messages
1. Turn the MFP off and then back on. 2. Swap the color cartridge indicated with a cartridge in another slot to determine whether the error follows the cartridge or stays with the slot. If the error follows the cartridge, replace that cartridge. Otherwise, proceed to step 3. 3. Reset the connectors between the memory PCB (J4001) and the DC controller (J1021). 4. Replace the memory PCB. 5. Replace the DC controller PCB. Calibrate the printer after replacing the DC controller.
10.70.YY / 10.80.YY / 10.88.YY / 10.89.YY messages • When Override at out is selected in the Replace Supplies menu AND a print cartridge reaches an out state, a 10.70.YY message is posted in the event log and the MFP continues to print. • When the print cartridge subsequently reaches one of the three thresholds set for override, one of the following errors is posted to the event log and the MFP will not continue to print. • 10.80.YY = user limit • 10.88.YY = HP predefined maximum use/wear. • 10.89.YY = out of toner
10.71.YY / 10.81.YY messages • When Autocontinue black is selected in the Color Supply Out menu and a color print cartridge reaches an out state, a 10.71.YY message is posted in the event log and the MFP continues to print in black-only mode. • When the black cartridge subsequently reaches the out state, a 10.81.YY message is posted to the event log and the MFP will not continue to print unless Override at out is set.
10.90.YY / 10.92.YY messages 1. Turn the MFP off and then on. 2. Reseat the print cartridge. 3. Replace the indicated print cartridge
1. Turn the MFP off and then back on. 2. Swap the color cartridge indicated with a cartridge in another slot to determine whether the error follows the cartridge or stays with the slot. If the error follows the cartridge, replace that cartridge. Otherwise, proceed to step 3. 3. Reset the connectors between the memory PCB (J4001) and the DC controller (J1021). 4. Replace the memory PCB. 5. Replace the DC controller PCB. Calibrate the printer after replacing the DC controller.
10.70.YY / 10.80.YY / 10.88.YY / 10.89.YY messages • When Override at out is selected in the Replace Supplies menu AND a print cartridge reaches an out state, a 10.70.YY message is posted in the event log and the MFP continues to print. • When the print cartridge subsequently reaches one of the three thresholds set for override, one of the following errors is posted to the event log and the MFP will not continue to print. • 10.80.YY = user limit • 10.88.YY = HP predefined maximum use/wear. • 10.89.YY = out of toner
10.71.YY / 10.81.YY messages • When Autocontinue black is selected in the Color Supply Out menu and a color print cartridge reaches an out state, a 10.71.YY message is posted in the event log and the MFP continues to print in black-only mode. • When the black cartridge subsequently reaches the out state, a 10.81.YY message is posted to the event log and the MFP will not continue to print unless Override at out is set.
10.90.YY / 10.92.YY messages 1. Turn the MFP off and then on. 2. Reseat the print cartridge. 3. Replace the indicated print cartridge