Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 13.12.07 — HP Color LaserJet CM4730 MFP

Code: 13.12.07

Display: 13.12.07 Jam In Stapler
Description: The stapler could not finish its cycle but was able to return to the home position If the stapler drive does not return to home position (HP) during the normal cycle, the stapler/stacker driver signals M1304 (stapler motor) to rotate once in reverse. If the HP signal is now detected, the stapler/ stacker driver sends a signal to the formatter that a staple jam is present.
Remedy: 1. Remove the staple cartridge and any loose staples or staples that might be obstructing stapler movement. 2. Remove one sheet of staples from staple cartridge and try again. 3. Inspect the staple cartridge for damage. Replace the staple cartridge if it is damaged. 4. Verify that genuine HP staples are being used. NOTE: Staples come preloaded in the staple cartridge and cannot be ordered separately as a refill from HP. 5. If none of the above corrects problem, replace the stapler/stacker unit.

← Xem tất cả mã lỗi HP Color LaserJet CM4730 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie