Code: 13.12.09
Display: 13.12.09 Jam In Left Accessory
Description: Stay jam. Inlet-paper sensor PS1501 remained activated longer than expected. This signal is generated by sensor PS1501 (paper-inlet sensor). PS1501 is located under the lower entrance guide plate with the sensor arm extending up through the guide plate and into the paper path.
Remedy: 1. Slide the mailbox device away from the MFP and remove any paper found entering the mailbox device or exiting the MFP. 2. Slide the mailbox back into the MFP and check for an error. 3. If the error persists, turn the MFP off then on. 4. If none of the above corrects the problem, replace the MBM unit.