Code: 13.12.09
Display: 13.12.09 Jam In Left Accessory
Description: Stay jam at the entrance to the stapler/ stacker. Sensor PS1301 stayed activated longer than expected. This signal is generated by sensor PS1301 (paper-inlet sensor). PS1301 is located under the lower-entrance guide plate with the sensor arm extending up through the guide plate and into the paper path.
Remedy: 1. Slide the stapler/stacker away from the MFP and remove any paper found entering the stapler/stacker or exiting the MFP. 2. Slide the stapler/stacker back into the unit and check for an error. 3. If the error persists, turn the MFP off then on. 4. If none of the above corrects the problem, replace the stapler/stacker unit.