Code: 50.X
Display: 50.X FUSER ERROR
Description: A fuser error has occurred. The following are specific fuser errors: 50.1: A low fuser temperature error has occurred in the main thermistor. 50.2: A fuser warmup service error has occurred. 50.3: A high fuser temperature error has occurred in the main thermistor. 50.6: An open fuser error has occurred. 50.7: A fuser pressure release mechanism failure has occurred. 50.8: Low fuser sub-thermistor temperature 50.9: High fuser sub-thermistor temperature The error might be due to an inadequate power supply, inadequate line voltage, or a problem with the fuser.
Remedy: 1. Turn the MFP off and allow it to cool down. 2. Reinstall the fuser, and check the connector (J5001) that connects the fuser and the printer. Replace the connector if it is damaged. 3. Replace the fuser. 4. Check all cable connections to/from the DC controller. 5. Replace the low-voltage power supply PCB.