Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 54.XX — HP Color LaserJet CM4730 MFP

Code: 54.XX

Display: 54.XX Printer Error
Description: 54 errors indicate sensor abnormalities. Sensor abnormalities are caused by failed or black sensors, or sensors that report results outside of an expected range. NOTE: Some 54 errors do not stop the printing process and are noted on the event log but not on the control panel. 54.01 = environmental temperature sensor output is abnormal (appears only in the event log) 54.05 = Media sensor failure (appears only in the event log) 54.07 = yellow drum phase (home) position sensor 54.08 = magenta drum phase (home) position sensor 54.09 = cyan drum phase (home) position sensor 54.0A = black drum phase (home) position sensor 54.0B = Density Sensor Out of Range 54.0C = Halftone Calibration 54.0D = Halftone Calibration Diffusion 54.0F = CPR Out of Range NOTE: Errors 07 through 0F appear only in the event log and printing continues.
Remedy: 54.01 procedure: 1. Check that all of the environmental requirements are met. 2. Turn the MFP off and then on. 3. Check connector J5201 on the environmental sensor and connector J1010 on the DC controller. 4. Replace the environmental sensor. 5. Replace the DC controller.
54.05 procedure: 1. Check connector J4201 on the paper feed assembly and connector J1013 on the DC controller. 2. Replace the paper feed assembly. 3. Replace the DC controller.
54.07, 54.08, 54.09, 54.0A procedure: 1. Check connector J1022 on the DC controller to the drum home position sensor for the color indicated. 2. Replace the main drive assembly. 3. Replace the DC controller.
54.0B, 54.0C, 54.0D, 54.0F procedure: The last two digits indicate the color (00 = black, 01 = cyan, 02 = magenta, 03 = yellow) 1. Check for correct formation of the calibration swatches on the ETB. If the swatches are light or missing a color, check the primary transfer components (cartridge, main drive assembly, HVPS) for the missing or light color. 2. Check the cartridge and replace if necessary. 3. Check connectors J4401A/J4401B on the color misregistration sensor to J1012 on the DC controller. 4. Replace the paper feed assembly. 5. Replace the DC controller.

← Xem tất cả mã lỗi HP Color LaserJet CM4730 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie