Code: 60.X
Display: 60.X ERROR
Description: A tray lifting error has occurred, where X is the number of the tray. This typically happens when a tray is overfilled or the media is not properly aligned. 60.2 = tray 2 60.3 = tray 3 60.4 = tray 4
Remedy: 1. Turn the MFP off and then on. 2. Verify that the tray is not overfilled and that media is aligned in the tray properly. 3. For tray 2, verify that connector J93 on the DC controller is firmly seated. This connector is for the lift motor. 4. Verify that connector J4618 is securely connected, and then check connector J1015 on the DC controller. 5. For trays 3 and 4, verify that connectors J8226 and 8211 on the paper deck driver PCB are securely connected. 6. If a loud clicking sound is heard while the MFP restarts, reinstall the lifter motor assembly and ensure that the gears are seated properly. Also ensure that the cassette pickup roller is properly installed. If the lifter motor assembly is damaged, replace the assembly and check for any obstruction.