Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 66.12.41 — HP Color LaserJet CM6030 MFP

Code: 66.12.41

Display: 66.12.41
Description: Finisher: folding-paper-positioning-plate motor (M4) The paper-positioning-plate motor (M4), located in the booklet making area of the finisher, controls the Up and down positioning of the stacked paper for stitch stapling and for folding. Error occurs when the paper-positioningplate home-position sensor (PI7) does not turn on when the paper-positioning-plate motor (M4) has been driven for 1500 pulses. Also occurs when the paper-positioning-plate home-position sensor (PI7) does not turn off when the paper-positioning-plate motor (M4) has been driven for 300 pulses.
Remedy: Control-panel diagnostics: M4-guide plate motor (paper-positioning-plate motor) 1. Test the paper-positioning-plate motor M4 by using the finisher component test from the control-panel display. During the test, observe the movement of the booklet-maker-guide plate, and make sure it is not obstructed or damaged. 2. Remove the booklet-maker output bin to gain access to the paper-position-plate home-position sensor PI7 and delivery door. Remove the plate that holds PI7, and carefully clean the sensor body by gently blowing clean air across the sensor to remove dust and debris. 3. Make sure that the sensor is securely fastened to the plate. 4. Check the wiring at the sensor. 5. If the error persists, replace sensor PI7 and the positioning-plate assembly together. 6. Only if the error persists and none of the previous steps correct the problem, replace the stacker controller PCA.

← Xem tất cả mã lỗi HP Color LaserJet CM6030 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie