Description: Finisher control board RAM error The checksum for the finisher stacker controller PCA has an error when the power is turned on.
Remedy: Control-panel diagnostics: none 1. Make sure that the finisher is properly grounded. • Ensure that the finisher is latched and locked to the engine by tightening the thumbscrew inside the front door. • Ensure that the grounding-frame assembly (the bar with the wheel located between the engine and the finisher) is in the down position with the wheel touching the floor and that the grounding plate is not damaged. NOTE: The grounding-frame assembly is in the up position when the finisher is shipped. It must be lowered when the finisher is installed. 2. Turn the engine power off and then on to try clearing this error. 3. If the error persists, replace the stacker controller PCA.