Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 66.12.15 — HP Color LaserJet CM6049 MFP

Code: 66.12.15

Display: 66.12.15
Description: Finisher stapling or offsetting rear-aligningplate motor failure (M34) In order to neatly align the paper stack for either stapling or offsetting to take place, the front and rear aligning plates move to align each sheet when it enters the processing tray. The error occurs when the aligning plate either does not leave or when it does not return to the aligning-plate rear- home- position sensor (PI37) when the rearaligning- plate motor (M34) has been driven for 4 seconds.
Remedy: Control-panel diagnostics: none 1. Verify that Offsetting is turned On in the Device Behavior menu. 2. Verify that connector J722 on the stacker controller PCA is fully seated and not damaged. Also check the wiring at sensor PI37 and motor M34. 3. Replace the operation-tray assembly (processing tray). 4. Only if the error persists and none of the previous steps correct the problem, replace the stacker controller PCA.

← Xem tất cả mã lỗi HP Color LaserJet CM6049 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie