Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 50.7X.YZ — HP Color LaserJet Enterprise CM4540 MFP

Code: 50.7X.YZ

Display: 50.7X.YZ Fuser Error
Description: The product experienced a fuser error. • X = fuser mode • Y = previous printer sleep state • Z = next printer sleep state
Fuser pressure-release mechanism failure
Remedy: 1. Remove the fuser, and then reinstall the fuser. Make sure that there is no residual paper in the fuser. 2. Check the fuser pressure-release sensor flag. If it is damaged, replace the fuser. 3. Use the sensor test in the manual sensor test to verify that the fuser pressure-release sensor (SR7) is properly functioning. If it is not, replace the sensor. 4. Use the fuser pressure-release drive test in the component test to verify that the fuser motor (M2) is properly functioning. If it is not, replace the fuser motor. 5. If this product has been previously serviced, check the connector (J128) on the DC controller PCA.

← Xem tất cả mã lỗi HP Color LaserJet Enterprise CM4540 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie