Code: 13.WX.YZ
Display: 13.WX.YZ Fuser area jam
Description: • 13.B9.AZ Stopped at fuser jam This jam occurs when the paper stays at the fuser output sensor for a designated amount of time after it has reached the fuser output sensor. Z = fuser mode • 1 = Normal auto sense • 2 = Normal non-auto sense • 3 = Light 1 to 3 • 4 = Heavy 1 • 5 = Heavy 2 • 6 = Heavy 3 • 7 = Glossy 1 • 8 = Glossy 2 • 9 = Glossy 3 • A = Glossy film • B = Transparency • C = Label • D = Envelope 1 to 3 • E = Rough • 0 = Photo 1 to 3
• 13.B9.DZ Z = the source tray number This jam occurs when the paper does not reach the fuser output sensor in the designated amount of time. • 13.E1.DZ Z = fuser mode This jam occurs when the paper stays at the fuser output sensor for a designated amount of time after it has reached the fuser output sensor.
• 13.B9.DZ Z = the source tray number This jam occurs when the paper does not reach the fuser output sensor in the designated amount of time. • 13.E1.DZ Z = fuser mode This jam occurs when the paper stays at the fuser output sensor for a designated amount of time after it has reached the fuser output sensor.
Remedy: Clear the jam. See the clear jams section in the service manual. For a 13.B9.DZ jam: Make sure media is within specifications, check for obstructions in the fuser, check that the T2 roller is installed properly.