Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 50.2X.YZ — HP Color LaserJet Enterprise M553

Code: 50.2X.YZ

Display: 50.2X.YZ
Description: Fuser warm-up error
Remedy: action1. Remove and reinstall the fuser. Make sure that it is seated correctly.2. Make sure that there is no residual paper in the fuser.3. Check the printer power source. Make sure that the power source meets printer requirements. Make sure that the printer is the only device using the circuit.4. Check the connector (J50) between the fuser and printer. If the connector is damaged, replace the connector assembly or the Fuser5. Reconnect the connector (J128) on the DC controller PCA, connector (J600) on the low voltage power supply assembly and the connectors (J6002 and J6003) on the fuser power supply assembly6. If the issue persists, replace the fuser.7. If error still remains, replace the fuser power supply assembly. Fuser Power Supply assembly Part number: RM2-7125-000CN 8. Replace the low-voltage power assembly.

← Xem tất cả mã lỗi HP Color LaserJet Enterprise M553

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie