Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 01:10 — HP DesignJet 815

Code: 01:10

Description: Electronics Module failure.
The possible cause could be: 1. The Electronics Module is of the wrong type (a 16 MB Electronics Module will not work in a 24" Model). 2. Reading, writing or initializing the EEROM failed. 3. One of the ASIC’s was not found within the Serial Bus that connects the Electronics Module to the Carriage Assembly. 4. One of the ASIC’s did not respond to the Serial Bus that connects the Electronics Module to the Carriage Assembly. 5. The Electronics Module is requesting a move to the Service Station while the previous move is still being completed. 6. The Electronics Module Cooling Fan has reached its current limit.
Remedy: Replace the Electronics Module

← Xem tất cả mã lỗi HP DesignJet 815

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie