Code: 1160
Description: Wiping Error
When the Wiping Motor has been running for a while, the sensor fails to detect that the Motor has made one turn.
When the Wiping Motor has been running for a while, the sensor fails to detect that the Motor has made one turn.
Remedy: Check whether the Wiper turns once and the Wiper Sensor detects the turn when the Printer is initializing when it is powered On. • If the Wiper does not turn once: – Check manually by turning the Wiper Gears to see if the Wiper turns. If it does not turn then replace the Wiping Station. – Check whether 24 V is supplied to the Main PCA with the circuit tester. If the Wiper Motor does not turn even though the 24 V is supplied, there is a possibility of a failure in the Wiper Motor. Replace the Wiping Station. – Make sure the Wiper Sensor Cable is connected correctly and is not damaged. – If the error continues, replace the Main PCA. • If the Wiper does turn once: – Check whether the Wiper Sensor can be switched ON and OFF by manually rotating the Wiper. Check whether the lever type switch is not loose. – Make sure the Wiper Sensor Cable is connected correctly and is not damaged. – Make sure that the Wiper Sensor is clean. – If the error continues, replace the Main PCA.