Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 119x — HP DesignJet 9000s

Code: 119x

Description: Head Relay Variable Supply Error
Output voltages of the Head Relay Board are abnormal.
Remedy: • Check whether 36V is supplied to the Main PCA. If not, then: – Make sure that the Rear Cover is closed. – Replace Power Supply Unit. • Preset the Head Relay Board Voltage from the Diagnostic Menu. Use a circuit tester to check the voltages of the channels that have an error. • If the voltage is supplied, it means that the voltage check circuit is defective. Replace the Main PCA. • If the voltage is not supplied, replace the Head Relay Board. • There is a possibility of a short circuit off the Head Relay Board output line. Perform a short circuit test on the Main PCA. • Make sure the Carriage Trailing Cable is connected correctly and is not damaged.

← Xem tất cả mã lỗi HP DesignJet 9000s

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie