Code: 120x
Description: Printhead Drive IC Error
The Piezo Drive IC on a Printhead is too hot (85C or higher) or too low (- 10C or lower).
The Piezo Drive IC on a Printhead is too hot (85C or higher) or too low (- 10C or lower).
Remedy: • Check whether the temperature of the Printhead voltage circuit on the Carriage PCA is extremely hot. If it is extremely high, check the short-circuit of the Printhead and the Printhead Cable using a tester. The Short-circuit may have been caused by the incorrect insertion of the Printhead Cable, internal failure of the Printhead or by a foreign object attached to the Carriage PCA. • Replace the Printhead. • Replace the Carriage PCA.