Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi H07 — HP DesignJet 9000s

Code: H07

Description: Rear Heater Time-out Error
The temperature of the Rear Heater does not reach the preset temperature even after 15 minutes.
Remedy: • Make sure that the Voltage alternation switch located at the back of the Printer is set correctly to the AC voltage being used. • Make sure that the Fuse (F2) on the Heater Relay Assembly has not blown. If the fuse has blown, replace it. • Make sure that the Heater Board is connected correctly to the Relay Board via the Relay Cable. • Make sure that the Heater Relay Assembly is connected correctly to the Rear Heater. • Replace the Heater Relay Assembly. • Replace the Rear Heater.

← Xem tất cả mã lỗi HP DesignJet 9000s

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie