Code: 08:11
Description: Connection problem with the Front Panel. Problem with communication between the Front Panel, the Formatter and the HDD.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • If the printer emits one or multiple fbeepsf as the printer turns On, perform the procedure fUsing the buzzer at Power-up to Troubleshootf ËPage 43. Four beeps would indicate an error with the Front Panel: • Check that the Front Panel cable is not damaged and is correctly connected to the Front Panel and to the Interconnect PCA. • Check that the Memory Module is installed correctly. • Check that the cables between the Interconnect PCA and the Main PCA are not damaged and are correctly connected. • Check that the cables between the Hard Disk Drive and the Power Supply Unit and the Main PCA are not damaged and are correctly connected. • Check that the cable between the Power Supply Unit and the Main PCA is not damaged and is correctly connected. • Check that the Printer has the latest Firmware version, if not, update the firmware to the latest version. • Replace the Interconnect PCA . • Replace the Sausalito PCI PCA .