Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 14.15:00 — HP DesignJet L25500

Code: 14.15:00

Description: Generic failure with the Heaters Control Assembly. There is a failure with the Heaters Control assembly.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check all the cables are connected in the Electronics module. • Replace the Heaters Control assembly (60 inch.). Note: If the Curing module has recently been replaced because of a faulty resistor, this fault can also damage the triac control system. • Replace the Sausalito PCI PCA . • Replace the PrintMech . • Replace the Main PCA Formatter . • Replace the internal cables of the Electronics Module.

← Xem tất cả mã lỗi HP DesignJet L25500

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie