Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 15.01:00 — HP DesignJet L25500

Code: 15.01:00

Description: Drying system warm up timed out. Drying System unable to warm up in the pre-defined amount of time (45C for standby & normally 55C for printing).
Remedy: • Check if the environmental ambient temperature is low. Check the surrounding temperature is within the printerLs operating specifications; it should be higher than 15C for printer operation. If this is the case, increase the ambient temperature of the printerLs location. • Check if the input voltage is in the range of 198v to 205v, ensure the ambient temperature is higher than 20C for the correct functioning of the printer. • Check if the substrate loaded on the printer is too transparent or reflective for the IR sensor to detect the surface temperature. Check this by loading another type of substrate. • Check if the Dryer IR sensor is dirty and requires cleaning, use the cleaning procedures described in the Userfs Guide while observing all safety precautions while working in the area of the heaters. • Check the power going to the IR sensor. A good indication is that the blue LED on the sensorfs body will light if the sensor is pointing to an object warmer than 30C. • Perform the IR sensor diagnostic check 8.3 Heating IR Sensor ËPage 169, to check the values being detected by the IR sensor. Replace the Dryer IR sensor if required ËPage 496. • Check if the position of the IR sensor is correct, if it is pointing to a position other than the substrate this will cause an error. • Check the input voltage is outside the range of specifications for printing, check the installation instructions. • Replace the Heaters Control Assembly. • If the power arrives to the heater, but the heater does not heat up, replace the heater assemblyËPage 498.

← Xem tất cả mã lỗi HP DesignJet L25500

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie