Code: 15.04:00
Description: Drying system temperature too low. Drying System has exceeded the lower temperature level (below 5C)
Remedy: • Check if the environmental ambient temperature is low. Check the surrounding temperature is within the printerLs operating specifications; it should be higher than 15C for printer operation. If this is the case, increase the ambient temperature of the printerLs location. • Check if the Dryer IR sensor is dirty and requires cleaning, use the cleaning procedures described in the Userfs Guide while observing all safety precautions while working in the area of the heaters. • Check the power going to the IR sensor. A good indication is that the blue LED on the sensorfs body will light if the sensor is pointing to an object warmer than 30c. • Check the position of the IR sensor is correct, if it is pointing to a position other than the substrate this will cause an error. • Perform the IR sensor check 1.8.1 Heating and Curing temp ËPage 195, to check the values being detected by the IR sensor. Replace the Dryer IR sensor if required ËPage 496. • Replace the Heaters Control Assembly ËPage 465.