Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 16.10:00 — HP DesignJet L25500

Code: 16.10:00

Description: Curing Assembly resistors incorrect. The firmware measures the current through the Burst resistor and the steady resistor, and it checks that one is greater than the other. If the measurements detected are not as expected this could indicate that the heaters have been swapped in error.
Remedy: Replace the Curing Heaters

← Xem tất cả mã lỗi HP DesignJet L25500

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie