Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 23:10 — HP DesignJet L25500

Code: 23:10

Description: Problem with pressurization in the APS. The APS has received a request to depressurize, but the system does not depressurize in under a specific time (120 seconds).
Remedy: • Check that the relief valve cable is not damaged and is correctly connected to the PrintMech PCA. • Check the continuity in the cable of the relief valve. • Try tapping the relief valve of the APS with a screw driver to release the mechanism. • Check the air tubes connected to the relief valve are not bent or twisted and that air can flow in the tubes. • To check if the issue has been solved perform the APS service test . • If the test fails replace the APS . • Replace the PrintMech PCA . • Replace the Sausalito PCI PCA .

← Xem tất cả mã lỗi HP DesignJet L25500

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie