Code: 24.03:00
Description: One of the Top Cover Fans not connected. The firmware has detected that one or more of the Top Covers Fans is not working.
Remedy: • Perform the service test 2.4 ËPage 129 to confirm that one or more of the Top cover Fans is not working. • If none of the fans are working, this would indicate a failure with the PrintMech, or the cables from the PrintMech: • Check the cables from the Printmech. • If all the cables from the Printmech to the fans are connected, replace the Printmech ËPage 482. • If at least one of the fans is working, check if the failed fans are connected to the array, if it is connected replace the failed fan Top Cover Fans ËPage 349. • If the error is not cleared, check all the cables from the failed fan to the PrintMech.