Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 32:01.02 — HP DesignJet L25500

Code: 32:01.02

Description: Problem with the Take Up Reel. This system error happens when there is a small amount of paper printed (less than 70 inches long), and the Take Up Reel sensor detects that the loop shaper is (incorrectly) at the bottom of its path, even though the spindle motor has been rotating for more that 3 seconds. The most probable cause of this error is the user has forgotten to set the switch direction or tape the paper to the spindle core, when the paper reaches the floor and blocks the Take Up Reel IR sensors.
Remedy: • Check that there is no interference around the Take Up Reel optical sensors. • Check the paper is attached to the Take Up Reel spindle. • Check the Take Up Reel switch is in the correct position. • Check there is no obstacle between the Take Up Reel optical sensors • If required, use the Take Up Reel arrow keys to wind paper before resuming the print. • When the jam is cleared, printing is resumed. Press the Ok key to clear the Warning message.

← Xem tất cả mã lỗi HP DesignJet L25500

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie