Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 58:10 — HP DesignJet L25500

Code: 58:10

Description: Problem with the Color Sensor
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Printer has the latest Firmware version, if not, update the firmware to the latest version. • Perform the 1.6.1 Color Sensor test . • If the error is displayed during the printerfs initialization, perform the g6.2 Color Sensor service testh . • If the error is displayed after the printer has initialized, for example when performing a Color Calibration/Linearization, perform the 5.6.3. Open/Close SOLËPage 223. • If the Color Sensor Shutter opens and closes, but the error is still displayed, replace Color Sensor Assembly . • If the Color Sensor Shutter does not open or close, replace the Color Sensor Actuator Assembly ËPage 492. • If the color sensor activator does not elevate or is broken, replace the Color Sensor Actuator Assembly ËPage 492. • If the test is unable to find a good position to open the shutter: • Replace the Color Sensor ËPage 488. • Replace the Encoder Strip ËPage 399. • If the System Error continues, replace the Carriage PCA .

← Xem tất cả mã lỗi HP DesignJet L25500

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie