Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 08:11 — HP DesignJet L26500

Code: 08:11

Description: Connection problem with the Front Panel. Problem with communication between the Front Panel, the Formatter and the HDD.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • If the printer emits one or multiple fbeepsf as the printer turns On, perform the procedure fUsing the buzzer at Power-up to Troubleshootf ËPage 43. Four beeps would indicate an error with the Front Panel: • Check that the Front Panel cable is not damaged and is correctly connected to the Front Panel and to the Interconnect PCA. • Check that the Memory Module is installed correctly. • Check that the cables between the Interconnect PCA and the Main PCA are not damaged and are correctly connected. • Check that the cables between the Hard Disk Drive and the Power Supply Unit and the Main PCA are not damaged and are correctly connected. • Check that the cable between the Power Supply Unit and the Main PCA is not damaged and is correctly connected. • Check that the Printer has the latest Firmware version, if not, update the firmware to the latest version. • Replace the Interconnect PCA . • Replace the Sausalito PCI PCA .

← Xem tất cả mã lỗi HP DesignJet L26500

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie