Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 14.03:00 — HP DesignJet L26500

Code: 14.03:00

Description: Current too high on the Curing Module. Overcurrent in Curing Module. The level of amps is over 18 amps, or the amount of current requested from the curing Module is too high.
Remedy: • Check if there is an AC voltage surge from the customers electrical supply. • Replace the heaters in the Curing Module, replace . • If the level of AC voltage is normal, replace the Heater Control Assembly .

← Xem tất cả mã lỗi HP DesignJet L26500

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie